How To Choose Suitable Ultrasonic Flowmeter

Ultrasonic flowmeter measurement method is to use ultrasonic propagation time difference algorithm to measure the flow rate in the pipeline, and then convert the flow rate from the flow rate; When the ultrasonic wave is moving in the same direction as the fluid, the faster the velocity, the greater the time difference in propagation. And the fluid state will change the speed of ultrasonic travel, using the time difference obtained by the front and rear sensors to estimate the velocity and flow.

Ultrasonic flowmeter products have the characteristics of high measurement accuracy and high resolution, the sensor from the tube wall to the tube sends ultrasonic signals, without contact with the fluid, more no pressure loss, and because of the 'non-contact' measurement method, there is no loss, pressure loss, easy plug, pollution problems.

In the selection of ultrasonic flow timing, there are many aspects to pay attention to at the same time, such as liquid type, temperature, signal output, pipe diameter... Such data, need to be taken into consideration when choosing, and one is indispensable, we provide you with a simple selection of ultrasonic products in three steps, so that you can easily step into the world of high-precision measurement.

1. Confirm the type of flow measurement body and the temperature range during measurement;

2. Confirm the pipe diameter, flow range and measurement accuracy requirements;

3. Select pipe material, output mode and power supply mode.