How does a Vortex Flow Meter work?

Jul 25, 2025

Leave a message

Michael Chen
Michael Chen
With a strong background in engineering and a focus on flow dynamics, Michael is dedicated to ensuring the precision and reliability of FlowT's products through rigorous testing and quality control.

Vortex flow meters are widely used in various industries for measuring the flow rate of fluids. As a trusted supplier of vortex flow meters, I am excited to share with you how these remarkable devices work.

Basic Principle of Vortex Flow Meters

The operation of a vortex flow meter is based on the von Kármán vortex street principle. When a fluid (liquid, gas, or steam) flows around a bluff body (also known as a shedder bar) placed in the flow path, vortices are alternately shed from either side of the bluff body. These vortices create a fluctuating pressure field in the fluid downstream of the bluff body.

The frequency of the vortex shedding is directly proportional to the fluid velocity. This relationship can be described by the Strouhal number (St), which is a dimensionless number defined as:

St = f * d / V

Where:

  • f is the frequency of vortex shedding (Hz)
  • d is the width of the bluff body (m)
  • V is the average fluid velocity (m/s)

By measuring the frequency of the vortex shedding, the fluid velocity can be determined. Once the velocity is known, the volumetric flow rate can be calculated by multiplying the velocity by the cross - sectional area of the pipe.

Components of a Vortex Flow Meter

A typical vortex flow meter consists of the following main components:

Bluff Body

The bluff body is the key element that initiates the formation of vortices. It is usually a non - streamlined shape, such as a cylinder or a rectangular bar. The shape and size of the bluff body are carefully designed to ensure stable and predictable vortex shedding over a wide range of flow rates.

Sensor

The sensor is responsible for detecting the pressure fluctuations caused by the vortex shedding. There are several types of sensors used in vortex flow meters, including piezoelectric sensors, capacitive sensors, and strain - gauge sensors. Piezoelectric sensors are the most commonly used due to their high sensitivity and fast response time. When the vortices pass by the sensor, they generate mechanical vibrations, which are converted into electrical signals by the piezoelectric material.

Signal Processor

The signal processor receives the electrical signals from the sensor and processes them to determine the frequency of the vortex shedding. It uses advanced algorithms to filter out noise and interference, and then calculates the flow rate based on the Strouhal number relationship. The processed flow rate data can be displayed on a local indicator or transmitted to a control system via various communication protocols, such as 4 - 20 mA, Modbus, or HART.

Working Process of a Vortex Flow Meter

Let's take a closer look at the step - by - step working process of a vortex flow meter:

Fluid Approach

The fluid enters the pipe where the vortex flow meter is installed. As the fluid approaches the bluff body, it is forced to flow around it.

Vortex Formation

When the fluid flows around the bluff body, the boundary layer on the surface of the bluff body separates, creating regions of low - pressure behind the bluff body. This causes vortices to form alternately on either side of the bluff body. The vortices grow in size as they move downstream until they are shed into the main flow.

Vortex Detection

The sensor detects the pressure fluctuations caused by the passing vortices. These fluctuations are converted into electrical signals, which are then sent to the signal processor.

Signal Processing

The signal processor analyzes the electrical signals to determine the frequency of the vortex shedding. Using the pre - calibrated Strouhal number, it calculates the fluid velocity. Based on the pipe diameter and the velocity, the volumetric flow rate is calculated.

Output and Display

The calculated flow rate data is either displayed on a local display on the flow meter or transmitted to a remote control system. This allows operators to monitor and control the flow rate in real - time.

Advantages of Vortex Flow Meters

Vortex flow meters offer several advantages over other types of flow meters:

Wide Rangeability

They can measure flow rates over a wide range, typically from low to high flow velocities. This makes them suitable for a variety of applications, from small - scale laboratory setups to large - scale industrial processes.

Pulse Liquid Turbine Flowmeter With Small DiameterPulse Liquid Turbine Flowmeter With Small Diameter

High Accuracy

Vortex flow meters can provide high - accuracy measurements, especially when properly calibrated and installed. They are less affected by changes in fluid properties such as density, viscosity, and temperature compared to some other flow measurement technologies.

Low Maintenance

With no moving parts (except for the small vibrations of the sensor), vortex flow meters require minimal maintenance. This reduces downtime and operating costs in the long run.

Compatibility with Different Fluids

They can be used to measure the flow of liquids, gases, and steam. This versatility makes them a popular choice in many industries, including chemical, oil and gas, power generation, and water treatment.

Applications of Vortex Flow Meters

Vortex flow meters are used in a wide range of applications, including:

Steam Measurement

In power plants and industrial steam systems, vortex flow meters are used to measure the flow rate of steam. They can accurately measure the mass flow rate of steam, which is crucial for energy management and process control. For high - temperature steam applications, you can check out our High Temp Insertion Vortex Flow Meter Transmitter Fit for Steam Measurement.

Gas Flow Measurement

In the oil and gas industry, vortex flow meters are used to measure the flow of natural gas, propane, and other gases. They can provide accurate flow measurements in pipelines, storage facilities, and distribution networks. Our Flow Meter Vortex Steam Meter is suitable for gas flow measurement as well.

Liquid Flow Measurement

In chemical processing plants, water treatment facilities, and food and beverage industries, vortex flow meters are used to measure the flow of various liquids. They can handle corrosive and abrasive liquids, making them a reliable choice for challenging applications. For small - diameter liquid flow measurement, our Pulse Liquid Turbine Flowmeter With Small Diameter offers a great solution.

Conclusion

Vortex flow meters are highly reliable and accurate devices for measuring the flow rate of fluids. Their simple yet effective working principle, combined with their many advantages, makes them a popular choice in a wide range of industries. Whether you need to measure steam, gas, or liquid flow, our company offers a variety of vortex flow meters to meet your specific requirements.

If you are interested in purchasing vortex flow meters for your application, we invite you to contact us for a detailed discussion. Our team of experts will be happy to assist you in selecting the right flow meter and providing you with the best solutions.

References

  1. ISO 10790:2019, “Measurement of fluid flow in closed conduits - Vortex meters”.
  2. Miller, R. W., “Flow Measurement Engineering Handbook”, McGraw - Hill, 1996.
  3. Spitzer, D. W., “Flow Measurement: Practical Guides for Measurement and Control”, ISA, 2001.
Send Inquiry