Hey there! As a supplier of transmitters, I often get asked about what the output signal of a transmitter actually is. Well, let's dive right into it and break it down in a way that's easy to understand.
First off, a transmitter is a device that measures a physical quantity like pressure, temperature, or flow and then converts that measurement into an electrical signal. This electrical signal can then be sent to a control system or a monitoring device for further processing.
There are several types of output signals that transmitters can produce, and each has its own advantages and uses. The most common ones are analog and digital signals.
Analog Output Signals
Analog signals are continuous signals that vary in proportion to the measured quantity. The two most widely used analog output signals in the industrial world are the 4 - 20 mA current loop and the 0 - 10 V voltage signal.
4 - 20 mA Current Loop
The 4 - 20 mA current loop is by far the most popular analog output signal for transmitters. The reason for its popularity is its simplicity, reliability, and immunity to electrical noise. In a 4 - 20 mA current loop, the current flowing through the loop represents the measured value. A current of 4 mA typically corresponds to the minimum value of the measured range, while 20 mA corresponds to the maximum value.
For example, if you have a Pressure Transmitter with Hart Protocol for Water Measurement that measures water pressure from 0 to 100 psi, 4 mA would represent 0 psi and 20 mA would represent 100 psi. Any value in between can be calculated based on the linear relationship between the current and the pressure.
One of the great things about the 4 - 20 mA current loop is that it can be easily transmitted over long distances without significant signal degradation. This makes it ideal for industrial applications where the transmitter may be located far away from the control system.
0 - 10 V Voltage Signal
The 0 - 10 V voltage signal is another common analog output signal. Similar to the 4 - 20 mA current loop, the voltage varies in proportion to the measured quantity. A voltage of 0 V represents the minimum value of the measured range, and 10 V represents the maximum value.
However, the 0 - 10 V voltage signal is more susceptible to electrical noise and signal loss over long distances compared to the 4 - 20 mA current loop. So, it's usually used in applications where the transmitter and the control system are relatively close to each other.
Digital Output Signals
Digital signals, on the other hand, are discrete signals that represent the measured value in a binary format. There are several digital communication protocols that transmitters can use to output digital signals, such as HART, Modbus, and Profibus.
HART Protocol
The HART (Highway Addressable Remote Transducer) protocol is a hybrid communication protocol that allows both analog and digital communication over the same two - wire 4 - 20 mA current loop. It provides additional information about the transmitter, such as configuration settings, diagnostic data, and calibration information.
Our Pressure Transmitter with Hart Protocol for Water Measurement uses the HART protocol, which means you can not only get the pressure measurement in the form of a 4 - 20 mA current signal but also access other valuable information through the digital communication channel.
Modbus
Modbus is a serial communication protocol that is widely used in industrial automation. It allows transmitters to communicate with other devices, such as programmable logic controllers (PLCs) and human - machine interfaces (HMIs), over a serial network.
Modbus uses a master - slave architecture, where the master device (usually a PLC or an HMI) sends requests to the slave devices (transmitters) and receives responses. This makes it easy to integrate transmitters into a larger industrial control system.
Profibus
Profibus is another popular digital communication protocol in the industrial world. It is a high - speed, deterministic communication protocol that is used for connecting sensors, actuators, and other devices in a factory automation environment.
Transmitters that use the Profibus protocol can communicate with other Profibus - compatible devices in a network, allowing for seamless integration and control.
Other Output Signals
In addition to analog and digital signals, some transmitters may also produce other types of output signals, such as pulse signals and frequency signals.
Pulse Signals
Pulse signals are used in applications where the measured quantity is a discrete event, such as the number of rotations of a shaft or the number of items passing on a conveyor belt. Each pulse represents a single event, and the frequency of the pulses can be used to calculate the rate of the events.
Frequency Signals
Frequency signals are similar to pulse signals, but the frequency of the signal varies in proportion to the measured quantity. For example, in a flow meter, the frequency of the output signal may be proportional to the flow rate of the fluid.
Choosing the Right Output Signal
When choosing a transmitter, it's important to consider the type of output signal that best suits your application. If you need a simple and reliable signal for long - distance transmission, the 4 - 20 mA current loop is probably the best choice. If you need to access additional information about the transmitter or integrate it into a digital network, a transmitter with a digital output signal like HART, Modbus, or Profibus would be more suitable.


We offer a wide range of transmitters with different output signals to meet your specific needs. For example, our Industrial Pressure Transmitter for Liquid Measurement Smart Type Flow Meter comes with various output options, including 4 - 20 mA, 0 - 10 V, and HART. And our Stable Gauge or Absolute Pressure Transmitter with Digital Signal Output is perfect for applications where a digital output signal is required.
If you're not sure which output signal is right for your application, our team of experts is here to help. We can provide you with technical advice and guidance to ensure that you choose the best transmitter for your needs.
Conclusion
In conclusion, the output signal of a transmitter is an important factor to consider when selecting a transmitter for your application. Whether you need an analog signal like 4 - 20 mA or 0 - 10 V, or a digital signal like HART, Modbus, or Profibus, we have the right transmitter for you.
If you're interested in purchasing transmitters or have any questions about our products, don't hesitate to reach out to us. We're always happy to assist you with your procurement needs and help you find the best solution for your application.
References
- "Industrial Instrumentation and Control Systems" by Bela Liptak
- "Process Control Instrumentation Technology" by Curtis D. Johnson
