Vortex flowmeter is a common flow measurement instrument, which is suitable for many industrial fields. However, due to various reasons, vortex flowmeters may fail, which will affect the normal operation of industrial production. Here are some common vortex flowmeter failures and their maintenance methods.
1. The signal output is abnormal. In the process of using the vortex flowmeter, there may be abnormal signal output, such as the output signal fluctuation and deviation. In this case, you can check whether there is external interference, such as electromagnetic interference. If it is confirmed that the problem is the instrument itself, you can check whether the circuit board is damaged, or check whether the sensor is damaged, and the damaged parts need to be replaced;
2. Temperature drift. During the use of vortex flowmeter, there may be a problem of temperature drift, resulting in a decrease in measuring accuracy of the instrument. At this point, you can check whether you need to recalibrate the vortex flowmeter or replace the temperature sensor;
3. Blockage. During the use of vortex flowmeter, there may be blockage, which affects the measuring accuracy of the flowmeter. At this point, the pipe inside the vortex flowmeter can be cleaned to ensure smooth flow;
4. Overload. During the use of vortex flowmeter, there may be overload, resulting in instrument failure or burn out. In this case, you need to check whether the overload protection device works properly, or replace the appropriate overload protection device.
In short, vortex flowmeter is a very important industrial measuring instrument, and various failures may occur during use. Through timely inspection and maintenance, it can ensure the normal operation of the vortex flowmeter and ensure the smooth progress of industrial production.
