As a supplier of vortex meters, I often encounter questions from customers regarding the suitability of our products in various flow conditions. One of the most common inquiries is whether a vortex meter can be used in a pulsatile flow system with high - frequency pulsations. In this blog post, I will delve into this topic, exploring the capabilities and limitations of vortex meters in such challenging environments.
Understanding Vortex Meters
Before we discuss the use of vortex meters in pulsatile flow systems, it's essential to understand how these meters work. Vortex meters operate on the principle of the von Kármán vortex street. When a fluid flows past a bluff body (also known as a shedder bar) placed in the flow path, alternating vortices are shed on either side of the bluff body. The frequency of these vortex shedding is directly proportional to the fluid velocity, and by measuring this frequency, the flow rate can be determined.
Vortex meters are known for their accuracy, reliability, and wide range of applications. They can be used to measure the flow of liquids, gases, and steam, making them a versatile choice for many industries, including oil and gas, chemical, and power generation.
Pulsatile Flow and High - Frequency Pulsations
Pulsatile flow is a flow pattern where the fluid velocity varies periodically with time. This can occur due to various reasons, such as the operation of pumps, compressors, or reciprocating engines. High - frequency pulsations refer to pulsations with a relatively short period, typically in the range of several Hertz to several hundred Hertz.
Pulsatile flow can pose challenges to flow measurement devices because the varying velocity can cause fluctuations in the measured flow rate. In the case of high - frequency pulsations, these fluctuations can be particularly difficult to handle, as the measurement device needs to respond quickly enough to capture the rapid changes in velocity.
Can a Vortex Meter Handle High - Frequency Pulsations?
The ability of a vortex meter to handle high - frequency pulsations depends on several factors, including the design of the meter, the amplitude and frequency of the pulsations, and the properties of the fluid being measured.


Meter Design
Modern vortex meters are designed to be relatively immune to low - frequency pulsations. The meter electronics are typically configured to filter out these low - frequency variations and provide a stable measurement of the average flow rate. However, high - frequency pulsations can be more challenging.
Some vortex meters are equipped with advanced signal processing algorithms that can help to mitigate the effects of high - frequency pulsations. These algorithms can analyze the raw signal from the sensor and extract the true vortex shedding frequency, even in the presence of pulsations. Additionally, the physical design of the meter, such as the shape and size of the shedder bar, can also influence its ability to handle pulsations. A well - designed shedder bar can help to stabilize the vortex shedding process and reduce the impact of pulsations on the measurement.
Amplitude and Frequency of Pulsations
The amplitude and frequency of the pulsations play a crucial role in determining whether a vortex meter can be used in a pulsatile flow system. If the amplitude of the pulsations is relatively small compared to the average flow velocity, the vortex meter may still be able to provide an accurate measurement. However, if the amplitude is large, the pulsations can disrupt the vortex shedding process and cause significant errors in the measurement.
Similarly, the frequency of the pulsations is also important. As mentioned earlier, modern vortex meters can filter out low - frequency pulsations. However, if the frequency of the pulsations is close to the natural frequency of the meter or the vortex shedding frequency, resonance can occur, leading to inaccurate measurements. In general, vortex meters are more likely to be suitable for pulsatile flow systems with relatively low - frequency pulsations.
Fluid Properties
The properties of the fluid being measured, such as its density, viscosity, and compressibility, can also affect the performance of a vortex meter in a pulsatile flow system. For example, a highly viscous fluid may dampen the effects of pulsations, making it easier for the meter to provide an accurate measurement. On the other hand, a compressible fluid, such as a gas, can be more susceptible to the effects of pulsations, as the pressure and density variations associated with the pulsations can influence the vortex shedding process.
Case Studies and Applications
In some industrial applications, vortex meters have been successfully used in pulsatile flow systems with high - frequency pulsations. For example, in a chemical plant, a vortex meter was installed in a pipeline carrying a liquid with a pulsatile flow caused by a reciprocating pump. The meter was equipped with advanced signal processing algorithms that were able to filter out the high - frequency pulsations and provide an accurate measurement of the average flow rate.
However, in other cases, the use of a vortex meter in a pulsatile flow system may not be suitable. For instance, in a natural gas pipeline with high - frequency pressure pulsations caused by a compressor, the pulsations were so severe that they disrupted the vortex shedding process and made it impossible for the vortex meter to provide an accurate measurement. In such cases, alternative flow measurement technologies, such as Coriolis or ultrasonic flow meters, may be more appropriate.
Our Vortex Meter Solutions
At our company, we offer a range of vortex meters that are designed to meet the needs of various applications, including those with pulsatile flow. Our High Temp Insertion Vortex Flow Meter Transmitter Fit for Steam Measurement is suitable for high - temperature steam applications and can handle a certain degree of pulsations. It features a robust design and advanced signal processing to ensure accurate and reliable measurement.
Our Vortex Flow Meter Perfect Fit for Steam or Gas Application with Good Performance is another option that is well - suited for a wide range of fluids, including steam and gases. This meter is equipped with state - of - the - art electronics that can help to minimize the effects of pulsations on the measurement.
For applications where accurate steam flow measurement is required, our Flow Meter Vortex Steam Meter is an excellent choice. It is designed to provide precise measurements even in challenging environments, including those with pulsatile flow.
Conclusion and Call to Action
In conclusion, while a vortex meter can potentially be used in a pulsatile flow system with high - frequency pulsations, it depends on several factors, including the meter design, the amplitude and frequency of the pulsations, and the fluid properties. In many cases, modern vortex meters with advanced signal processing capabilities can provide accurate measurements in the presence of pulsations.
If you are considering using a vortex meter in a pulsatile flow system, we encourage you to contact us for more information. Our team of experts can help you to evaluate your specific application and determine whether a vortex meter is the right choice for you. We can also provide detailed technical specifications and guidance on installation and operation to ensure the best possible performance of our meters. Don't hesitate to reach out to us to start a discussion about your flow measurement needs and explore the potential of our vortex meters in your application.
References
- "Flow Measurement Handbook: Industrial Designs and Applications" by Richard W. Miller
- "Vortex Flowmeters: Principles, Design, and Applications" by various authors in the field of flow measurement
