FT101 transfer time ultrasonic flow meter
Wall mount, transducers time ultrasonic flow Meter. Use our independent technical TGA calculate Software.
What’s TGA? TGA is our independent R&D technical, which based on the well known TDC calculate software. But TGA has higher speedy, higher accuracy performance on the measure the real time. We use a 400,000 gate array FPGA to satisfied the requirement and make sure the performance of this complicated TGA calculate software .
Transmitter(Electronic)
TGA technical greatly improved the rate of sampling. FT101 ultrasonic flow meter rate of sampling is greater than 300 times per second. Compared with other ultrasonic flow meter, it has better bearing performance when face
the bubbles. The maximum tolerable is 5 seconds of continuous air bubbles. Increase the single strength. The increase of signal strength is more easy to penetrate for various kinds of scale, rust inside the pipe and inner lining. The maximum tolerable cement inner is 18mm. With the enhanced transducers, the biggest clamp on type transducers we used in field is DN2000mm.
Hot Tags: oil flow meter, China oil flow meter manufacturers, suppliers, factory, reliable ultrasonic flow meter, ultrasonic flow meter for pharmaceuticals, ultrasonic flow meter, ultrasonic flow meter wholesale, ultrasonic flow meter for slurries, ultrasonic flow meter for corrosive fluids
•Clampon type and wetted type sensor both available, easy to install.Both clamp on
and wetted transducer could install without cutting off the running water.
•Highly accurate (0.5%) and repeatable(0.15%) flow measurement.
Ultrasonicflow meter use to measure the single medium, such as the pure water, cooling water, water, chemical, oil, milk, etc.Because clamp on type sensor install don’t need to break the pipe, so it widely use in the application which hard to cut off water, or use to measure the strongacid and alkaline liquid because it not need to touch the liquid.We have the ability to customization
depend on the environment, especially the pipe size under DN25
